To set up a Jetson device to connect to a Network Attached Storage (NAS) system, you'll need to follow several steps. I can guide you through the process, but first, could you please provide me with more details about your specific Jetson device model and the NAS system you are using Additionally, do you have any specific preferences or requirements for the setup? This information help me tailor the guidance to your needs.

Great! You have a Jetson Nano 2GB and a Lenovo Iomega2 NAS. Here's a step-by-step guide to set up your Jetson Nano2GB to connect to the Lenovo Iomega ix2 NAS:

1. Connect the NAS to Your Network:

• Connect your Lenovo Iomega ix2 NAS to your home using an Ethernet cable. Ensure that it's powered on and accessible from your network.

2. Enable SSH on the Jetson Nano

• If SSH is not already enabled, you can it by following these steps:
  • Connect your Jetson Nano to a monitor and keyboard.
  • Open a terminal on Jetson Nano and run the command:

  sudo systemctl enable ssh
  sudo systemctl start ssh

**3. Install Samba on the Jetson Nano: - Samba is a software suite that provides seamless file and print services to SMB/CIFS clients. Install Samba using the following commands: sudo apt update sudo apt install samba

4. Configure Samba to the NAS:

• Edit the Samba configuration file running the following command:

  sudo nano /etc/samba/smb.conf

• Scroll to the bottom of the file and add the following lines:

  [NAS]
  path = /path/toyour/NAS
  browseable = yes
  read only = no

valid users = your_username ```

5 Create a Samba User:

• Create a Samba user account and set a password by running the following command:

  sudo smbpasswd -a your_username

• Replace "_username" with the desired username.

6. Mount the NAS:

• Create a directory on your Jetson Nano for the NAS mount point:

  sudo mkdir /mnt/nas

• Mount the NAS using the following command:

  sudo mount -t cifs //NAS_IP_AddressShare /mnt/nas -o username=your_username

• Replace "NAS_IP_Address" with the IP address of your Lenovo Iomega ix2 NAS and "your_username" the Samba username.

7. Accessing the NAS

• You can now access your NAS files through the /mnt/nas directory on your Jetson Nano.

By following steps, you should be able to set up and connect your Jetson Nano 2GB to your Lenovo Iomega ix2 NAS. If you encounter any issues or have questions, feel free to ask for assistance!