To configure an IPv4 address using PowerShell, you use the -NetIPAddress cmdlet. This cmdlet allows you to and configure an IP address on a network adapter.

Here’s a step-by-step guide on how to configure an IPv4 address:

Step 1: Open PowerShell as Administrator**

Ensure you open with administrative privileges, as changing network configuration requires elevated permissions.

Step 2: Find the Interface Index or Name**

Before setting an IP address, you need to know which network adapter you're configuring. List all network adapters and their properties with:

Get-NetAdapter

Step 3: Set the Address

With the interface index or name, you can apply static IP address. Here's how to use New-NetIPAddress to set an IP address. Replace InterfaceAlias with the name of your network interface, and fill in IPAddress, PrefixLength (subnet mask), and DefaultGateway with your desired settings:

New-NetIPAddress -InterfaceAlias "Ethernet0" -IPAddress192.168.1.2 -PrefixLength 24DefaultGateway 192.168.1.1

In the above command- -InterfaceAlias is the name of the network interface you want to configure.

• -IPAddress is the new IP address you want to assign to the interface.
• -PrefixLength indicates the subnet mask's length, which is often 24 (.e., 255.255.255.0). -DefaultGateway` is the gateway for the interface.

Note: If the -PrefixLength parameter is not familiar to you, it's a different expressing the subnet mask using CIDR notation. A prefix length of 24 corresponds to the subnet mask 255.255.255..

**Step 4: Set the DNS Servers (Optional

If you also need to configure DNS servers, use the Set-DnsClientServerAddress cmdlet. Replace InterfaceAlias with your interface's name, and specify the ServerAddresses:

Set-DnsClientServerAddress -InterfaceAliasEthernet0" -ServerAddresses ("8.8.8.8","8.8.4.4```

In the command above, Google's public DNS servers (8.8.8.8 and 8.8.4.4) are. Replace them with the DNS servers you wish to use.

This is a guide to setting a static IP address using PowerShell. Remember to adjust the values for `IPAddress`, `PrefixLength`, `DefaultGateway`, `DNS` to match your network's requirements.  

As an AI text-based model, I cannot create or display images directly. However, I can guide you on how to create a script image on your own.

1. the PowerShell script that you have obtained or created to configure IPv4 to a text editor like Notepad.
2. Make sure the code is formatted correctly and that it is readable.
3. Take a screenshot of the script within your text editor. On Windows, you can use the Snipping Tool orip & Sketch app, or press PrtScn for the entire screen, or + PrtScn for the active window, and then paste it into an image like Paint.
4. Save the screenshot in your preferred image format (e.g., PNG, JPG).

Alternatively, if you want create an image with code-like styling similar to what you might on GitHub or other code sharing platforms, you can use a website that turns text into a styled image. Websites like Carbon (carbon.now.sh) allow you to paste your code and customize the appearance with themes, fonts, and color schemes. Once customized, you can the image.